HP Compaq d330 DT Troubleshooting Guide

2–26 www.hp.com Troubleshooting Guide
Troubleshooting Without Diagnostics
Solving Mouse Problems
Problem Cause Solution
Mouse does not respond to
movement or is too slow.
Mouse connector is
not properly plugged
into the back of the
computer.
Shut down the computer using the
keyboard.
1. Press the Ctrl and Esc keys at
the same time (or press the
Windows logo key) to
display the Start menu.
2. Use the up or down arrow key
to select Shut Down and then
press the Enter key.
3. Use the up or down arrow key
to select the Shut Down
option and then press the
Enter key.
4. After the shutdown is complete,
plug the mouse connector into
the back of the computer (or the
keyboard) and restart the
computer.
Program in use has
stopped responding
to commands.
Shut down the computer using the
keyboard and then restart the
computer.
Mouse needs repairs. See the Worldwide Limited
Warranty for details.
Computer is in
standby mode.
Press the power button to resume
from standby mode.
Ä
CAUTION: When attempting to resume from standby mode, do not hold down the
power button for more than four seconds. Otherwise, the computer will shut down and
you will lose your data.
Mouse will only move
vertically, horizontally, or
movement is jerky.
Mouse roller ball is
dirty.
Remove roller ball cover from the
bottom of the mouse and clean it
with a mouse cleaning kit available
from most computer stores.

HP Compaq d330 DT Specifications

General

Brand	HP
Model	Compaq d330 DT
Category	Desktop
Language	English