HP Compaq d330 DT Troubleshooting Guide

D–2 www.hp.com Troubleshooting Guide
Setting up Analog/Digital Audio Output
Microsoft Windows XP
1. Click Start > Control Panel and then double-click the Sounds,
Speech, and Audio Devices icon.
2. Select the Hardware tab.
3. Highlight the appropriate audio device.
4. Click Properties to open up the Device Properties panel.
5. Click the Properties tab.
6. Click the “+” next to Audio Devices to expand it.
7. Highlight the appropriate driver by clicking it.
8. Click Properties.
9. Click Settings.
10. Change the Output Mode to the desired setting.
11. Click OK to close the Properties panel.
12. Close the Control Panel.

HP Compaq d330 DT Specifications

General

Brand	HP
Model	Compaq d330 DT
Category	Desktop
Language	English