Troubleshooting Guide www.hp.com D–1
D
Setting up Analog/Digital Audio Output
Some computers may have an integrated audio solution that supports
analog or digital external stereo speakers. These systems are capable
of auto-sensing the speaker type and outputting the correct signal. To
manually change between analog, digital, and auto-sense, complete
the following set of procedures based on the operating system.
✎
If you set digital as the Output Mode, the internal speaker and
external analog speakers will no longer output audio until you switch
back to an auto-sense or analog mode. If you set analog as the Output
Mode, external digital speakers will not function until you change the
output mode back to an auto-sense or digital mode.
Microsoft Windows 2000
1. Click Start > Settings > Control Panel and double-click the
System icon to open the System Properties panel.
2. Select Device Manager from the System Properties panel.
3. Click the “+” next to the Sound, Video and Game Controllers
to expand it.
4. Double-click the appropriate audio device to open its Properties
panel.
5. In the Configuration area of the Settings tab, change the Output
Mode to the desired setting.
6. Click OK to close the Properties panel.
7. Close the System Properties panel.
8. Close the Control Panel.
To Next Page
Loading...
Need help?
General