HP DL320 - ProLiant - G3 - Page 122

LEDs, Switches, and Jumpers
Table E-5: System Configuration Switch (SW1) Settings
Position Function Default Description
S1 Reserved Off
S2 Lock configuration Off Open (off) = Normal Operation
Closed (on) = RBSU will not
commit any configuration
changes.
S3 Reserved Off
S4 Enable floppy boot Off Open (off) = Normal
Closed (on) = Override RBSU
setting and enable floppy boot.
S5 Password override Off Open (off) = Normal, honor
RBSU setting
Closed (on) = Override RBSU
setting and override password
prompts.
S6 Invalidate
CMOS/NVRAM
Off Open (off) = Normal
Closed (on) = BIOS will clear
CMOS and NVRAM.
S7 Reserved Off
S8 Reserved Off
NOTE: “On” activates the function.
HP ProLiant DL320 Generation 2 Server Setup and Installation Guide E-9
HP CONFIDENTIAL
Writer: Anna Roberts File Name: o-appe LEDs, Switches and Jumpers.doc
Codename: MoonStar Part Number: 293166-002 Last Saved On: 1/31/03 11:22 AM