Server Installation
2. Insert the tabs on the right edge of the fixed cable tray into the slots on the rack
rail (1) and fasten the rail thumbscrew that secures the fixed cable tray to the
rail (2).
Figure 4-4: Inserting and attaching the fixed cable tray
(rear view)
Installing the Cable Support Bracket on the Server
The Cable Support Bracket enables the use of the rack management solutions
available for this server.
Use the following procedure to attach the Cable Support Bracket:
1. Access internal server components. Refer to the “Accessing Internal Server
Components” section in Chapter 3, “Installing Hardware Options.”
HP ProLiant DL320 Generation 2 Server Setup and Installation Guide 4-5
HP CONFIDENTIAL
Writer: Anna Roberts File Name: e-ch4 Server Installation.doc
Codename: MoonStar Part Number: 293166-002 Last Saved On: 1/31/03 11:17 AM
To Next Page
Loading...
