Server Configuration and Utilities
The ROMPaq utility then checks the system and provides a choice (if more than one
exists) of ROM revisions to which the system can be upgraded. This procedure is the
same for both system and option ROMPaq utilities.
CAUTION: Do not power down during a firmware upgrade. A loss of power during
upgrade may corrupt the firmware and prevent the system from starting.
SmartStart Software
SmartStart software is a CD-based, single-server method for installing system
software, thereby achieving a well-integrated server and ensuring maximum
dependability and supportability. The SmartStart CD contains tools that diagnose
problems with the server, configure the storage array, and update the system ROM.
SmartStart software enables the user to perform the following functions:
•
•
•
•
•
•
Install major server operating systems using packaged product CDs.
Install the latest optimized drivers.
Create and copy standard server configuration scripts using the Scripting Toolkit
and Configuration Replication Utility.
Test server hardware using the new Enterprise Diagnostics LX32 Utility.
Update the latest system or option ROM using the ROM Update Utility.
Access software drivers through creation of diskettes or installation directly from
the CD. With systems that have internet connection, the SmartStart autorun
provides access to the complete list of ProLiant System Software on the website.
For more information about SmartStart software, refer to
www.compaq.com/smartstart
To install the SmartStart CD:
1. Press the F9 key to run RBSU and configure the primary operating system.
2. Locate the SmartStart CD in the ProLiant Essentials Foundation Pack.
3. After powering up the server, press the CD-ROM drive eject button.
5-4 HP ProLiant DL320 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Anna Roberts File Name: f-ch5 Server Configuration and Utilities.doc
Codename: MoonStar Part Number: 293166-002 Last Saved On: 1/31/03 11:18 AM
To Next Page
Loading...
