Server Configuration and Utilities
System Firmware Update
Smart Components for System Firmware Update enables Microsoft Windows NT 4.0
and Windows 2000 operating system administrators to efficiently upgrade and
manage system and array controller ROMs.
This tool includes the following features:
•
•
•
Works offline and online
Integrates with other HP software maintenance, deployment, and
operating system tools
Automatically checks for hardware, firmware, and operating system
dependencies, and installs only the correct ROM upgrades required by each
target server
Auto-Configuration Process
The auto-configuration process automatically runs when the user boots the server for
the first time. During the power-up sequence that occurs, the system ROM
automatically configures the system with defaults without needing any intervention.
By default, the auto-configuration process configures the system for the Microsoft
Windows 2000 operating system. To change any default settings in the auto-
configuration process, such as the settings for language, operating system, and
primary boot controller, execute RBSU by pressing the F9 key. After the settings are
selected according to the users preference, exit RBSU and reboot the server. For
more information on this process, refer to Chapter 3 of the HP ROM-Based Setup
Utility User Guide.
5-8 HP ProLiant DL320 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Anna Roberts File Name: f-ch5 Server Configuration and Utilities.doc
Codename: MoonStar Part Number: 293166-002 Last Saved On: 1/31/03 11:18 AM
To Next Page
Loading...
