Index
attaching See also installing
cable tray to rack 4-4
A
fixed rack rails to rack 4-3
AC, current rating 2-4
audible warnings D-8
access panel
Automatic Server Recovery See ASR
labels 3-1
proper cooling 2-7
B
accumulators A-8
batteries
activating unit identification switches 3-3
disposal A-7
airflow requirements, racks 2-3
life G-1
aligning
location 3-6
inner slide 4-4
part number G-1
PCI riser board assembly alignment
tabs 3-12
recycling or disposal A-8
replacement A-7
server rails with rack rails 4-7
beeps D-8. See also POST
alkaline battery warning A-7
bezel blank, removing 3-17
array See Integrated ATA RAID
Configuration Utility
BIOS See ROM. See firmware
blanking panels, rack 2-3
ASR (Automatic Server Recovery)
boards See expansion boards
disabling 5-7
BSMI notice A-5
overview 5-7
power cycling D-2, D-9
ATA controllers, connectors 3-6
C
ATA hard drives
cable clamp
device numbers 3-19
closing 4-14
installation guidelines 3-19
opening 4-13
installing 3-20
thumbscrews 4-13
jumper settings 3-19
cable tray, fixed
RAID configurations 6-1
attaching to rack 4-4
ATA RAID See Integrated ATA RAID
Configuration Utility
thumbscrews 3-4, 4-5, 4-8
HP ProLiant DL320 Generation 2 Server Setup and Installation Guide Index-1
HP CONFIDENTIAL
Writer: Richard O. Heath File Name: x-index.doc
Codename: MoonStar Part Number: 293166-001 Last Saved On: 1/31/03 11:27 AM
To Next Page
Loading...
