Server Installation
4. Connect the LAN cable to the external RJ-45 connector on the Remote Insight
Lights-Out Edition II.
Figure 4-10: Connecting the LAN cable to the Remote
Insight Lights-Out Edition II external RJ-45 connector
IMPORTANT: To allow LAN access to the Remote Insight Lights-Out Edition II, the LAN cable
must be attached to the RJ-45 connector on the RILOE II. The standard RJ-45 connectors on
the server rear panel do not provide network access to the RILOE II.
Securing the Cables in the Fixed Cable Tray
After attaching the fixed cable tray and cable support bracket and connecting the
peripheral devices and power cord, secure all cabling.
4-12 HP ProLiant DL320 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Anna Roberts File Name: e-ch4 Server Installation.doc
Codename: MoonStar Part Number: 293166-002 Last Saved On: 1/31/03 11:17 AM
To Next Page
Loading...
