Server Installation
Table 4-1: Rear Panel Connectors and Connection Order continued
Location Connector
12 USB 1 connector
13 USB 2 connector
14 Power connector
* Not used when the Remote Insight Lights-Out Edition II is installed.
CAUTION: Connect the power cord last or electrical damage to peripheral devices
may occur.
Cabling the Remote Insight Lights-Out Edition II
(Optional)
For more information on the Remote Insight Lights-Out Edition II (RILOE II), refer
to the Remote Insight Lights-Out Edition II User Guide included with the option kit,
or refer to
www.compaq.com/manage/remote-lightsout.html
1. Locate the external connectors on the rear panel of the server in the expansion
bay. Refer to Figure 4-8 and Table 4-1.
2. Disconnect the video cable from the video connector on the rear of the server.
4-10 HP ProLiant DL320 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Anna Roberts File Name: e-ch4 Server Installation.doc
Codename: MoonStar Part Number: 293166-002 Last Saved On: 1/31/03 11:17 AM
To Next Page
Loading...
