Installing Hardware Options
2. Insert the end of the shipping/ejector key into the CD-ROM/diskette or
DVD-ROM/diskette drive assembly ejector port, located immediately below the
Power On/Off switch on the server front panel.
3. Push the shipping/ejector key (1) into the port to eject the bezel blank (2).
Figure 3-13: Ejecting the bezel blank
NOTE: If you intend to use the CD-ROM/diskette or DVD-ROM/diskette drive assembly
ejection feature frequently, leave the shipping/ejector key in the ejector port for easy
access. Otherwise, store the shipping/ejector key for future use.
HP ProLiant DL320 Generation 2 Server Setup and Installation Guide 3-17
HP CONFIDENTIAL
Writer: Anna Roberts File Name: d-ch3 Installing Hardware Options.doc
Codename: MoonStar Part Number: 293166-002 Last Saved On: 1/31/03 11:16 AM
To Next Page
Loading...
