RAID Configuration and Management
6-10 HP ProLiant DL320 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Anna Roberts File Name: g-ch6 RAID Configuration and Management.doc
Codename: MoonStar Part Number: 293166-002 Last Saved On: 1/31/03 11:19 AM
2. If an unexpected message is received, such as Drives Missing or
Configuration Mismatch, switch off the server and check all connections,
ATA cables, and power cables.
3. If the
Configuration Mismatch message is received after adding new drives,
that is because the new drives had been used before and the configuration on the
drives was not cleared. If this message is displayed, press the F8 key to go to the
setup and create the array configuration as needed.
To Next Page
Loading...
