EasyManuals Logo

HP dx7400 - Microtower PC User Manual

HP dx7400 - Microtower PC
199 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #147 background imageLoading...
Page #147 background image
Control panel message Description Recommended action
2202-PMM Deallocation Error during MEBx
cleanup
Memory error during POST execution of the
Management Engine (ME) BIOS Extensions
option ROM
1. Reboot the computer.
2. Unplug the power cord, re-seat the
memory modules, and reboot the
computer.
3. If the memory configuration was
recently changed, unplug the power
cord, restore the original memory
configuration, and reboot the computer.
4. If the error persists, replace the system
board.
2203-Setup error during MEBx execution MEBx selection or exit resulted in a setup
failure.
1. Reboot the computer.
2. Unplug the power cord, re-seat the
memory modules, and reboot the
computer.
3. If the memory configuration was
recently changed, unplug the power
cord, restore the original memory
configuration, and reboot the computer.
4. If the error persists, replace the system
board.
2204-Inventory error during MEBx execution BIOS information passed to the MEBx
resulted in a failure.
1. Reboot the computer.
2. If the error persists, update to the latest
BIOS version.
3. If the error still persists, replace the
system board.
2205-Interface error during MEBx execution MEBx operation experienced a hardware
error during communication with ME.
1. Reboot the computer.
2. If the error persists, update to the latest
BIOS version.
3. If the error still persists, replace the
system board.
2211-Memory not configured correctly for
proper MEBx execution.
DIMM1 is not installed. Make sure there is a memory module in the
black DIMM1 socket and that it is properly
seated.
Invalid Electronic Serial Number Electronic serial number is missing. Enter the correct serial number in Computer
Setup.
Network Server Mode Active and No
Keyboard Attached
Keyboard failure while Network Server Mode
enabled.
1. Reconnect keyboard with computer
turned off.
2. Check connector for bent or missing
pins.
3. Ensure that none of the keys are
depressed.
4. Replace keyboard.
Table C-1 Numeric Codes and Text Messages (continued)
POST Numeric Codes and Text Messages 137

Table of Contents

Other manuals for HP dx7400 - Microtower PC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP dx7400 - Microtower PC and is the answer not in the manual?

HP dx7400 - Microtower PC Specifications

General IconGeneral
MemoryUp to 8 GB DDR2 SDRAM
AudioIntegrated High Definition Audio
Power Supply300W
ProcessorIntel Core 2 Duo, Pentium Dual-Core, or Celeron
StorageSATA Hard Drive
Optical DriveDVD-ROM, DVD+/-RW
GraphicsIntegrated Intel Graphics Media Accelerator 3100
NetworkingIntegrated Gigabit Ethernet
Expansion Slots1 PCI Express x16
Ports1 serial, 1 parallel, audio in/out
Operating SystemWindows XP Professional

Related product manuals