HP E3800 Series User Manual

6-60
RADIUS Authentication, Authorization, and Accounting
Accounting Services
Example. If the switch is configured with RADIUS accounting on the switch
to use start-stop for Exec, System, and Command functions, as shown in figure
6-23, there will be an “Accounting-On” record when the switch boots up and
an “Accounting-Off” record when the switch reboots or reloads. (Assume that
Acct-Session-Id is configured for common.)
Figure 6-23. Example of Accounting Session Operation with “start-stop” Enabled
Acct-Session-Id = "003600000001"
Acct-Status-Type = Accounting-On
NAS-IP-Address = 1.1.1.15
NAS-Identifier = "gsf_dosx_15"
Acct-Delay-Time = 5
Acct-Session-Id = "003600000002"
Acct-Status-Type = Start
Service-Type = NAS-Prompt-User
Acct-Authentic = Local
NAS-IP-Address = 10.1.242.15
NAS-Identifier = "gsf_dosx_15"
Calling-Station-Id = "0.0.0.0"
Acct-Delay-Time = 0
Acct-Session-Id = "003600000002"
Acct-Status-Type = Interim-Update
Service-Type = NAS-Prompt-User
Acct-Authentic = Local
NAS-IP-Address = 10.1.242.15
NAS-Identifier = "gsf_dosx_15"
NAS-Port-Type = Virtual
Calling-Station-Id = "0.0.0.0"
HP-Command-String = "reload"
Acct-Delay-Time = 0
Acct-Session-Id = "003600000001"
Acct-Status-Type = Accounting-Off
NAS-IP-Address = 10.1.242.15
NAS-Identifier = "gsf_dosx_15"
Acct-Delay-Time = 0
Record of Switch Bootup
Record of System Accounting Off
When Switch Reboots
Record of reload Command Issued
Record of User Session Start

HP E3800 Series Specifications

General

Brand	HP
Model	E3800 Series
Category	Switch
Language	English