10-97
IPv4 Access Control Lists (ACLs)
Displaying ACL Configuration Data
Displaying ACL Configuration Data
The show commands in this section apply to both IPv4 and IPv6 ACLs. For
information on IPv6 ACL operation, refer to the chapter titled “IPv6 Access
Control Lists” in the IPv6 Configuration Guide for your switch.
ACL Commands Function Page
show access-list Displays a brief listing of all IPv4 and IPv6 ACLs
on the switch.
10-98
show access-list config Display the type, identifier, and content of all
IPv4 and IPv6 ACLs configured in the switch.
10-99
show access-list vlan < vid > List the name and type for each IPv4 and IPv6
ACL application assigned to a particular VLAN
on the switch.
10-100
show access-list ports
< all | port-list >
Lists the IPv4 and IPv6 ACL static port
assignment for either all ports and trunks, or for
the specified ports and/or trunks.
10-99
show access-list < acl-name-str >
[config]
Display detailed content for a specific IPv4 or
IPv6 ACL. Using the config option displays the
ACL in a list format similar to that used to display
an ACL in the show running-config output.
10-103
show access-list resources Displays information on the resources currently
available in the switch. Refer to the “Monitoring
Resources” appendix in the latest Management
and Configuration Guide for your switch.
—
show access-list radius
< all | port-list >
Lists the RADIUS ACL(s) currently assigned for
either all ports and trunks, or for the specified
ports and/or trunks. For more on this topic, refer
to chapter 7, “Configuring RADIUS Server
Support for Switch Services”.
—
show port-access web-based
clients < port-list > detailed
show port-access mac-based
clients < port-list > detailed
show port-access authenticator
clients < port-list > detailed
For ports in the < port-list > shows the details of
the RADIUS-assigned features, including the
ACE matches in RADIUS-assigned ACLs
configured with the cnt (counter) option. For
more on this topic, refer to chapter 7,
“Configuring RADIUS Server Support for Switch
Services”.
—
show config
show running
show config includes configured ACLs and
assignments existing in the startup-config file.
show running includes configured ACLs and
assignments existing in the running-config file.
—
To Next Page
Loading...
Need help?
General