EasyManuals Logo
Home>HP>Switch>E3800 Series

HP E3800 Series User Manual

HP E3800 Series
732 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #298 background imageLoading...
Page #298 background image
7-8
Configuring RADIUS Server Support for Switch Services
RADIUS Server Configuration for CoS (802.1p Priority) and Rate-Limiting
For example, suppose port 4 has been statically configured from the CLI with
the following:
802.1p priority: 7
inbound rate-limit: 50 percent
outbound rate-limit: 50 percent
The above, statically configured, per-port priority and inbound rate-limit
settings will not apply to any clients who authenticate and receive different
inbound priority and rate-limit settings from the RADIUS server. If the RADIUS
server also assigns an outbound rate-limit setting, which is applied per-port
instead of per-client, then the outbound traffic from the port to all connected
clients will be rate-limited according to the value set by the server for the most
recently authenticated client. Thus, if client “X” authenticates with Web-Auth
on port 4 with a RADIUS server that assigns a priority of 3, an inbound rate-
limit of 10,000 kbps, and an outbound rate-limit of 50,000 kbps, then:
The inbound traffic from client “X” will be subject to a priority of 3
and inbound rate-limit of 10,000 kbps. Traffic from other clients using
the port will not be affected by these values.
The combined rate-limit outbound for all clients using the port will
be 50,000 kbps until either all client sessions end or another client
authenticates and receives a different outbound rate-limit.
web-based [ port-list ] clients detail displays, for a Web authen-
ticated client (Web-Auth), the status of RADIUS-assignment
details for that client.. (Refer to “Show Commands for Web
Authentication” on page 4-26.)
mac-based [ port-list ] clients detail displays, for a MAC authen-
ticated client (MAC-Auth), the status of RADIUS-assignment
details for that client. (Refer to “Show Commands for MAC-
Based Authentication” on page 4-65.)
authenticator [ port-list ] clients detail displays, for an 802.1X-
authenticated client, the status of RADIUS-assignment
details for that client.. (Refer to “Show Commands for Port-
Access Authenticator” on page 13-55.)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP E3800 Series and is the answer not in the manual?

HP E3800 Series Specifications

General IconGeneral
BrandHP
ModelE3800 Series
CategorySwitch
LanguageEnglish

Related product manuals