To Next Page

To Previous Page

7-39

Configuring RADIUS Server Support for Switch Services

Configuring and Using Dynamic (RADIUS-Assigned) Access Control Lists

Access Policy Details:

COS Map: Indicates the 802.1p priority assigned by the RADIUS server for traffic

inbound on the port from an authenticated client. The field shows an eight-digit value

where all digits show the same, assigned 802.1p number. For example, if the assigned

802.1p value is 5, then this field shows

55555555. If an 802.1p priority has not been

assigned by the RADIUS server, this field shows Not Defined.

Untagged VLAN: VLAN ID (VID) of the untagged VLAN currently supporting the authen-

ticated connection.

Tagged VLANs: VLAN IDs (VIDs) of any tagged VLANs currently supporting the authen-

ticated connection.

RADIUS ACL List: Lists the explicit ACEs in the ACL assigned to the port for the

authenticated client. Includes the ACE “Hit Count” (matches) for ACEs configured with

the cnt option. (Refer to “ACE Syntax in RADIUS Servers” on page 7-25.) If a RADIUS

ACL for the authenticated client is not assigned to the port,

No Radius ACL List appears in

this field.

In Limit Kbps: Indicates the ingress rate-limit assigned by the RADIUS server to the port

for traffic inbound from the authenticated client. If there is no ingress rate-limit

assigned, then

Not Set appears in this field.

Out Limit Kbps: Indicates the egress rate-limit assigned by the RADIUS server to the port

for traffic outbound to the authenticated client. If there is no egress rate-limit assigned,

then

Not Set appears in this field.

Questions and Answers:

Need help?

Do you have a question about the HP E3800 Series and is the answer not in the manual?

HP E3800 Series Specifications

General