To Next Page

To Previous Page

10-58

IPv4 Access Control Lists (ACLs)

Configuring Standard ACLs

Example of Creating and Viewing a Standard ACL. This example cre-

ates a standard, numbered ACL with the same ACE content as show in figure

10-14 on page 10-54.

Figure 10-16. Standard, Numbered ACL with the Same ACEs as the Standard, Named ACL in Figure 10-14

HP Switch(config)# access-list 17 permit host 10.10.10.104

HP Switch(config)# access-list 17 deny 10.10.10.1/24 log

HP Switch(config)# access-list 17 permit any

HP Switch(config)# show access-list 17

Access Control Lists

Name: 17

Type: Standard

Applied: No

SEQ Entry

------------------------------------------------------------------------------

10 Action: permit

IP : 10.10.10.104 Mask: 0.0.0.0

20 Action: deny (log)

IP : 10.10.10.1 Mask: 0.0.0.255

30 Action: permit

IP : 0.0.0.0 Mask: 255.255.255.255

Note that each ACE is

automatically assigned a

sequence number.

Questions and Answers:

Need help?

Do you have a question about the HP E3800 Series and is the answer not in the manual?

HP E3800 Series Specifications

General