HP E3800 Series User Manual

10-84
IPv4 Access Control Lists (ACLs)
Adding or Removing an ACL Assignment On an Interface
Figure 10-22. Methods for Enabling and Disabling ACLs
HP Switch(config)# interface b10 ip access-group My-List in
HP Switch(config)# interface b10
HP Switch(eth-b10)# ip access-group 155 in
HP Switch(eth-b10)# exit
HP Switch(config)# no interface b10 ip access-group My-List
in
HP Switch(config)# interface b10
HP Switch(eth-b10)# no ip access-group 155 in
HP Switch(eth-b10)# exit
Enables a static port ACL
from the Global
Configuration level.
Enables a static port ACL
from a port context.
Disables a static port ACL
from the Global
Configuration level.
Uses a VLAN context to
disable a static port ACL.

HP E3800 Series Specifications

General

Model	HP E3800 Series
Layer	Layer 3
Uplink Ports	4 x SFP+ ports
Stacking	Yes
Power over Ethernet (PoE)	Available on some models
Management	Web, CLI, SNMP
Power Supply	Redundant (optional)
Operating Temperature	0°C to 45°C
Dimensions (W x D x H)	440 x 424 x 44 mm
Operating Humidity	10% to 90% non-condensing