Table 9-3 Solid-state drive specications (continued)
256 GB* 512 GB* 1 TB*
Sequential read up to 2150 MBps up to 2150 MBps up to 2150 MBps
Random read Up to 300,000 IOPs Up to 300,000 IOPs Up to 300,000 IOPs
Sequential write up to 1550 MBps up to 1550 MBps up to 1550 MBps
Random write Up to 100,000 IOPs Up to 100,000 IOPs Up to 100,000 IOPs
Total logical sectors 468,883,296 1,000,215,216 1,500,336,388
Operating temperature 0°C to 70°C (32°F to 158°F)
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual
drive specications may dier slightly.
NOTE: Certain restrictions and exclusions apply. Contact support for details.
Solid-state drive specications (SATA-3)
This section provides specications for your solid-state drive.
Table 9-4
Solid-state drive specications
128 GB*
Dimensions
Height 1.35 mm
Weight < 10 g
Interface type SATA-3
Ready time, maximum (to not busy) 1.0 ms
Access times, logical 0.1 ms
Transfer rate up to 540 MBps
Total logical sectors 234,441,648
Operating temperature 0°C to 70°C (32°F to 158°F)
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specications can dier
slightly.
NOTE: Certain restrictions and exclusions apply. Contact support for details.
96 Chapter 9Specications