6. If the WWAN antenna is not connected to the terminal on the WWAN module, install a protective sleeve on
the antenna connector, as shown in the following illustration.
To install the WWAN module, reverse the removal procedure.
NOTE: WWAN modules are designed with a notch to prevent incorrect insertion.
Memory modules
To remove the memory modules, use this procedure and illustration.
Table 5-4
Memory module description and part numbers
Description Spare part number
32 GB (SODIMM, DDR5-4800, 1.1v, NECC) N05331-001
16 GB (SODIMM, DDR5-4800, 1.1v, NECC) M97596-001
8 GB (SODIMM, DDR5-4800, 1.1v, NECC) M97595-001
44 Chapter 5Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
