HP HPE Apollo 2000 Gen10 Plus User Manual

Power supply specifications
CAUTION: Do not mix power supplies with dierent eiciency and wattage in the chassis. Install only one type of
power supply. Verify that all power supplies have the same part number and label color. The system becomes
unstable and may shut down when it detects mismatched power supplies.
Depending on the installed options, the system is configured with one of the following power supplies:
• HPE 1600 W Flex Slot Platinum Hot-plug Low Halogen Power Supply
• HPE 1800 W–2200 W Flex Slot Platinum Hot-plug Power Supply
• HPE 3000 W 200–277 VAC Platinum Hot-plug Power Supply
For more information about the power supply features, specifications, and compatibility, see the Hewlett Packard
Enterprise website.
HPE 1600 W Flex Slot Platinum Hot-plug Low Halogen Power Supply
Specification Value
Input requirements
—
Rated input voltage
200 VAC to 240 VAC
240 VDC for China only
Rated input frequency 50 Hz to 60 Hz
Rated input current
87 A at 200 VAC
72 A at 240 VAC
Maximum rated input power
1734 W at 200 VAC
1725 W at 240 VAC
BTUs per hour
5918 at 200 VAC
5884 at 240 VAC
Power supply output
—
Rated steady-state power
1600 W at 200 VAC to 240 VAC input
1600 W at 240 VDC input
Maximum peak power
2200 W for 1 ms (turbo mode) at 200 VAC to 240 VAC
input
Specifications 96

HP HPE Apollo 2000 Gen10 Plus Specifications

General

Brand	HP
Model	HPE Apollo 2000 Gen10 Plus
Category	Measuring Instruments
Language	English