Information pull tab
Item Description
1 QR code label
2 Chassis serial number/product ID label
Use a mobile device to scan the QR code label to display the chassis mobile product page (https://www.hpe.com/qref/
apollo2000gen10plus). This page contains links to chassis setup information, spare part numbers, QuickSpecs,
troubleshooting resources, and other useful product links.
Front panel LEDs and buttons
Item
Description Status Definition
1 Node 2 UID button/LED
1
Solid blue Activated
Flashing blue • 1 flash per second = Remote management
or firmware upgrade in progress
• 4 flashes per second = iLO manual soft
reboot sequence initiated
• 8 flashes per second = iLO manual hard
reboot sequence in progress
Table Continued
Component identification 79
To Next Page
Loading...
Need help?
General
