To download the product, go to the Hewlett Packard Enterprise Software Depot (https://www.hpe.com/support/
softwaredepot). Click Insight Management, then click Insight Cluster Management.
Integrated Management Log
The IML records hundreds of events and stores them in an easy-to-view form. The IML timestamps each event with one-
minute granularity.
You can view recorded events in the IML in several ways, including the following:
• From within HPE SIM
• From within the UEFI System Utilities
• From within the Embedded UEFI shell
• From within the iLO web interface
Intelligent Provisioning
Intelligent Provisioning is a single-server deployment tool embedded in ProLiant servers and HPE Synergy compute
modules. Intelligent Provisioning simplifies server setup, providing a reliable and consistent way to deploy servers.
NOTE:
• Rapid Setup Software is only available on the ProLiant 300 Series servers or below. When you launch F10 mode from
the POST screen, you are prompted to select whether you want to enter the Intelligent Provisioning or HPE Rapid
Setup Software mode.
• After you have selected a mode, you must reprovision the server to change the mode that launches when you boot to
F10.
Intelligent Provisioning prepares the system for installing original, licensed vendor media and Hewlett Packard Enterprise-
branded versions of OS software. Intelligent Provisioning also prepares the system to integrate optimized server support
software from the Service Pack for ProLiant (SPP). SPP is a comprehensive systems software and firmware solution for
ProLiant servers, server blades, their enclosures, and HPE Synergy compute modules. These components are preloaded
with a basic set of firmware and OS components that are installed along with Intelligent Provisioning.
IMPORTANT: HPE ProLiant DX/XL servers do not support operating system installation with Intelligent
Provisioning, but they do support the maintenance features. For more information, see "Performing Maintenance" in
the Intelligent Provisioning user guide and online help.
After the server is running, you can update the firmware to install additional components. You can also update any
components that have been outdated since the server was manufactured.
To access Intelligent Provisioning:
• Press F10 from the POST screen and enter either Intelligent Provisioning or HPE Rapid Setup Software.
• From the iLO web interface using Lifecycle Management. Lifecycle Management allows you to access Intelligent
Provisioning without rebooting your server.
Intelligent Provisioning operation
NOTE: Intelligent Provisioning 340 and later requires iLO firmware version 210 or later.
Software and configuration utilities 159
To Next Page
Loading...
