NVDIMM LED identification
Item LED description LED color
1 Power LED Green
2 Function LED Blue
NVDIMM-N LED combinations
State Definition NVDIMM-N Power LED
(green)
NVDIMM-N Function LED
(blue)
0 AC power is on (12V rail) but the NVM
controller is not working or not ready.
On O
1 AC power is on (12V rail) and the NVM
controller is ready.
On On
2 AC power is o or the battery is o (12V rail
o).
O O
3 AC power is on (12V rail) or the battery is on
(12V rail) and the NVDIMM-N is active (backup
and restore).
On Flashing
NVDIMM Function LED patterns
For the purpose of this table, the NVDIMM-N LED operates as follows:
• Solid indicates that the LED remains in the on state.
• Flashing indicates that the LED is on for 2 seconds and o for 1 second.
• Fast-flashing indicates that the LED is on for 300 ms and o for 300 ms.
State
Definition NVDIMM-N Function LED
0 The restore operation is in progress. Flashing
1 The restore operation is successful. Solid or On
2 Erase is in progress. Flashing
3 The erase operation is successful. Solid or On
Table Continued
Component identification 23
To Next Page
Loading...
