HP HPE ProLiant DX360 Gen10 - HPE Trusted Platform Module 2.0 Gen10 Option; Overview

6.
Install the access panel (Install the access panel).
7.
Install the server in the rack.
8.
Connect each power cord to the server.
9.
Connect each power cord to the power source.
10.
Power up the server.
HPE Trusted Platform Module 20 Gen10 option
Overview
Use these instructions to install and enable an HPE TPM 20 Gen10 Kit in a supported server. This option is not
supported on a Gen9 and earlier server.
This procedure includes three sections:
1.
Installing the Trusted Platform Module board.
2.
Enabling the Trusted Platform Module.
3. Retaining the recovery key/password.
HPE TPM 20 installation is supported with specific operating system support such as Microsoft Windows Server 2012 R2
and later. For more information about operating system support, see the product QuickSpecs on the Hewlett Packard
Enterprise website (
https://www.hpe.com/info/qs). For more information about Microsoft Windows BitLocker Drive
Encryption feature, see the Microsoft website (
https://www.microsoft.com).
CAUTION: If the TPM is removed from the original server and powered up on a dierent server, data stored in the
TPM including keys will be erased.
Hardware options installation 141