• To modify the server configuration ROM default settings, press the F9 key in the ProLiant POST screen to enter
the UEFI System Utilities screen. By default, the System Utilities menus are in the English language.
• If you do not need to modify the server configuration and are ready to install the system software, press the F10
key to access Intelligent Provisioning.
For more information on automatic configuration, see the UEFI documentation on the Hewlett Packard Enterprise
website.
Selecting boot options
This server supports both Legacy BIOS Boot Mode and UEFI Boot Mode. On servers operating in UEFI Boot Mode, the
boot controller and boot order are set automatically.
Procedure
1. Press the Power On/Standby button.
2. Do one of the following:
• To enter the UEFI System Utilities screen and modify the server configuration ROM default settings, press the F9
key on the ProLiant POST screen. Choose one of the following boot modes:
◦ Legacy BIOS
◦ UEFI (default)
• If you do not need to modify the server configuration and are ready to install the system software, press the F10
key to access Intelligent Provisioning.
For more information on automatic configuration, see the UEFI documentation on the
Hewlett Packard Enterprise
website.
Registering the server
To experience quicker service and more eicient support, register the product at the
Hewlett Packard Enterprise
Product Registration website.
Setup
52
To Next Page
Loading...
