HP HPE ProLiant DX360 Gen10 - Primary PCI Riser Cage Options

14. Route and connect the data and power cables.
Hewlett Packard Enterprise recommends using embedded SATA solutions when connecting the cable. Other options
exist.
15.
Install drives or blanks (Drive options).
16.
Install the access panel (Install the access panel).
17. Install the server in the rack.
18.
Power up the server.
19. Connect each power cord to the server.
20. Connect each power cord to the power source.
Primary PCI riser cage options
The primary PCI riser cage supports the following:
Hardware options installation
87