HP LaserJet P3010 Series - Engine control unit (ECU)

For more information on the HP LaserJet P3010 | P3015 visit us at www.PrinterSupplies.com or call 800-551-1943
Power-switch assembly
WARNING! ESD sensitive component.
1. Before proceeding, remove the following components:
●
DIMM cover. See
DIMM cover and DIMM on page 57.
●
Formatter cover. See
Formatter cover and formatter PCA on page 60.
●
Top-right cover. See
Top-right cover on page 73.
●
Control panel. See
Control panel on page 74.
●
Front-right and right-side cover assembly. See
Front-right and right-side cover assembly
on page 76.
2. Disconnect one connector (callout 1), and then remove one screw (callout 2).
Figure 2-76 Remove the power-switch assembly (1 of 2)
1
2
96 Chapter 2 Removal and replacement ENWW