HP LaserJet P3010 Series - B Fuser output sensor

For more information on the HP LaserJet P3010 | P3015 visit us at www.PrinterSupplies.com or call 800-551-1943
B Fuser output sensor
Test the fuser delivery sensor (PS2)
1. Open the rear door.
2. Slowly insert a piece of paper to activate the fuser delivery sensor.
Figure 3-4 Test the fuser delivery sensor
3. Check the control-panel display for a sensor response.
4. If there is no response, replace the fuser.
ENWW Tools for troubleshooting 141