For more information on the HP LaserJet P3010 | P3015 visit us at www.PrinterSupplies.com or call 800-551-1943
Sub cover
NOTE: Duplex models only. The space under the sub cover is used by third-party manufacturers to
install optional devices for this product (for example, a security card reader).
Use a small flat blade screwdriver to carefully separate the sub cover from the product.
CAUTION: There are two tabs along the each of the long edges of the cover that fasten the cover to
the product. Do not breack the tabs when the cover is removed.
Figure 2-8 Remove the sub cover
ENWW Removal and replacement procedures 55
To Next Page
Loading...
