HP LaserJet P3010 Series - E Tray 3 feed sensor

For more information on the HP LaserJet P3010 | P3015 visit us at www.PrinterSupplies.com or call 800-551-1943
E Tray 3 feed sensor
Test the Tray 3 media-feed sensor (PS8008)
1. Remove the Tray 3 cassette.
2. Use a small screwdriver to activate the sensor.
Figure 3-7 Test the Tray 3 media-feed sensor
3. Check the control-panel display for sensor response.
4. If there is no response, replace the optional Tray 3 assembly.
144 Chapter 3 Solve problems ENWW