For more information on the HP LaserJet P3010 | P3015 visit us at www.PrinterSupplies.com or call 800-551-1943
C Duplex sensor
Test the duplex media-feed sensor (PS502)
1. Remove the Tray 2 cassette.
2. Press the green lever to release the duplex media-feed assembly (metal tray).
3. Raise the duplex media-feed assembly until it snaps into place.
Figure 3-5 Test the duplex media-feed sensor
4. Check the control-panel display for sensor response.
5. If there is no response, replace the high-voltage power supply (duplex model).
142 Chapter 3 Solve problems ENWW
To Next Page
Loading...
