HP LaserJet P3010 Series - PCL sub-menu

For more information on the HP LaserJet P3010 | P3015 visit us at www.PrinterSupplies.com or call 800-551-1943
Menu item Values Description
DUPLEX OFF*
ON
Enable or disable two-sided printing.
NOTE: This menu is available only on the
d, dn, and x models.
DUPLEX BINDING LONG EDGE*
SHORT EDGE
Change the binding edge for two-sided
printing.
NOTE: This menu is available only on the
d, dn, and x models.
OVERRIDE A4/LETTER NO
YES*
Set the product to print an A4 job on letter-
size paper when no A4 paper is loaded.
MANUAL FEED OFF*
ON
Makes the MANUAL FEED setting the
default for jobs that do not select a tray.
EDGE TO EDGE OVERRIDE NO*
YES
Change the printable area of Letter and A4-
size paper to 2 mm from the left and right
edges for single-sided printing. The
standard printable area is 4 mm from the
left and right edges.
COURIER FONT REGULAR*
DARK
Select a version of the Courier font.
The DARK setting is an internal Courier
font available on HP LaserJet Series III
printers and older.
WIDE A4 NO *
YES
Change the printable area of A4 paper.
NO: The printable area is seventy-eight 10-
pitch characters on a single line.
YES: The printable area is eighty 10-pitch
characters on a single line.
PRINT PS ERRORS OFF*
ON
Print PS error pages.
PRINT PDF ERRORS OFF*
ON
Print PDF error pages.
PCL sub-menu
This menu configures settings for the printer control language.
To display: Press the Menu button
, select the CONFIGURE DEVICE menu, select the PRINTING
menu, and then select the PCL menu.
NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no
default.
Item Values Description
FORM LENGTH Sets vertical spacing from 5 to 128 lines for default paper
size. The default is 60.
ENWW Tools for troubleshooting 179