HP LaserJet P3010 Series - Jam detection

For more information on the HP LaserJet P3010 | P3015 visit us at www.PrinterSupplies.com or call 800-551-1943
Jam detection
The product uses the following sensors to detect the presence of media and to check for jams. If media
does not reach or pass each sensor within a specified time, the ECU determines that a jam has occurred
and alerts the formatter.
NOTE: To find the following components, see Photo sensors and switches on page 34.
●
PS2; fuser delivery sensor
●
PS4; face-down tray media-full sensor
●
PS215; Top-of-Page (TOP) sensor
●
PS225; media width sensor
●
PS502; duplex media-feed sensor (duplex models only)
●
PS8008; paper feeder media-feed sensor
NOTE: PS8008 is used in Tray 3 and Tray 4.
The product detects the following jams:
●
Pickup delay jam
●
Pickup stationary jam
●
Delivery delay jam
●
Delivery stationary jam
●
Fuser wrapping jam
●
Door open jam
●
Residual media jam
●
Duplex repickup jam (duplex models only)
40 Chapter 1 Theory of operation ENWW