For more information on the HP LaserJet P3010 | P3015 visit us at www.PrinterSupplies.com or call 800-551-1943
Tray 1 or Tray 2
Pickup and feed unit
The pickup and feed unit uses the following components and processes.
Cassette paper size detection/cassette paper detection
NOTE: To find the following components, see Photo sensors and switches on page 34.
●
PS3; cassette media-presence sensor
●
PS225; media width sensor (detects media width after the media enters the paper path)
Cassette pickup
NOTE: To find the following components, see Solenoids and clutches on page 36.
●
SL2; cassette (Tray 2) pickup solenoid
Tray 1 paper pickup
NOTE: To find the following components, see Photo sensors and switches on page 34 and Solenoids
and clutches on page 36.
●
PS205; Tray 1 (multipurpose tray) media-presence sensor
●
SL1; Tray 1 (multipurpose tray) pickup solenoid
38 Chapter 1 Theory of operation ENWW
To Next Page
Loading...
