HP LaserJet P3010 Series - D Paper width sensor 1

For more information on the HP LaserJet P3010 | P3015 visit us at www.PrinterSupplies.com or call 800-551-1943
D Paper width sensor 1
Test the media width sensor (PS225)
1. Open the cartridge door, and then remove the print cartridge.
2. Raise and then lower the registration flap to activate the sensor.
Figure 3-6 Test the media width sensor
3. Check the control-panel display for a sensor response.
4. If there is no response, replace the media width sensor PCA.
ENWW Tools for troubleshooting 143