For more information on the HP LaserJet P3010 | P3015 visit us at www.PrinterSupplies.com or call 800-551-1943
5. Remove one screw (callout 1), and then remove the left-side guide (callout 2).
Figure 2-119 Remove the high-voltage power supply (4 of 11)
1
2
6. Remove one screw (callout 1), release one tab (callout 2) and then slide the guide toward the front
of the product to release it.
Remove the guide.
Figure 2-120 Remove the high-voltage power supply (5 of 11)
1
2
ENWW Removal and replacement procedures 123
To Next Page
Loading...
