For more information on the HP LaserJet P3010 | P3015 visit us at www.PrinterSupplies.com or call 800-551-1943
3. Push up on the link arm to release it.
CAUTION: The link arm is under spring tension. Do not let the link arm snap back toward the
product when you release it.
Figure 2-22 Remove the rear-door assembly (3 of 8)
4. Remove two screws (callout 1).
Figure 2-23 Remove the rear-door assembly (4 of 8)
1
ENWW Removal and replacement procedures 63
To Next Page
Loading...
