Enable memory
Windows XP, Windows Server
2003, Windows Server 2008,
and Windows Vista
1. Click Start.
2. Click Settings.
3. Click Printers and Faxes (using the default Start menu view) or click
Printers (using the Classic Start menu view).
4. Right-click the product driver icon, and then select Properties.
5. Click the Device Settings tab.
6. Expand the area for Installable Options.
7. Next to Automatic Configuration, select Update Now.
8. Click OK.
NOTE: If the memory is not updated correctly after using the Update Now
option, you can manually select the total amount of memory installed in the product
in the Installable Options area.
The Update Now option overwrites any existing product configuration settings.
Windows 7 1. Click Start.
2. Click Devices and Printers.
3. Right-click the product driver icon, and then select Printer properties.
4. Click the Device Settings tab.
5. Expand the area for Installable Options.
6. Next to Automatic Configuration, select Update Now.
7. Click OK.
NOTE: If the memory is not updated correctly after using the Update Now
option, you can manually select the total amount of memory installed in the product
in the Installable Options area.
The Update Now option overwrites any existing product configuration settings.
Mac OS X 10.5 and 10.6 1.
From the Apple menu
, click the System Preferences menu and then
click the Print & Fax icon.
2. Select the product in the left side of the window.
3. Click the Options & Supplies button.
4. Click the Driver tab.
5. Configure the installed options.
ENWW
Install memory DIMMs
89
To Next Page
Loading...
