Menu item Sub-menu item Sub-menu item Sub-menu item Description
Color Cartridges Very Low Setting Stop
Prompt*
Continue
Print Black
Set how the product behaves when the one of
the color print cartridges reaches the very low
threshold.
●
Prompt: The product stops printing and
prompts you to replace the print cartridge.
You can acknowledge the prompt and
continue printing. A customer configurable
option on this product is "Prompt to Remind
Me in 50 pages, 100 pages, 200 pages,
or never." This option is provided as a
customer convenience and is not an
indication these pages will have acceptable
print quality.
●
Continue: The product alerts you that the
print cartridge is very low, but it continues
printing.
●
Print Black: When configured this way,
the product alerts you that the print
cartridge is very low, but it continues
printing in black only. To configure the
product to print in color and use the
remaining toner in the print cartridge past
very low, select the Continue option
instead.
When you choose to replace the very low
print cartridge, color printing resumes
automatically.
●
Stop: The product stops printing until you
replace the print cartridge.
Low Threshold Cyan
Magenta
Yellow
Enter percentage
Use the arrow buttons to increase or decrease
the percentage of estimated life remaining at
which the product alerts you that the print
cartridge is low.
For the color print cartridges that ship with the
product, the default is 16%. For the replacement
color print cartridges, the default is 7%.
The default values are intended to provide
approximately two weeks of use before the
cartridge reaches the very low state.
14 Chapter 2 Control panel menus ENWW
To Next Page
Loading...
