j. When installing a display panel, be sure to install the stretchable tape on the left and right
sides of the display back cover as shown in the following illustration.
OLED display panels are available as the following spare part numbers:
● P34006-001—ceramic white
● P34007-001—shadow black
3. To remove the display panel from WUXGA displays:
a. At the bottom left and right corners of the display panel, insert tweezers (1) into the hole at the
end of the stretchable tape that is installed under the left and right sides of the display panel.
b. Pull the tape (2) out from behind the display panel. You have to pull the tape several times to
completely remove it.
c. Lift and rotate the panel (3) over onto the keyboard.
Display assembly
73
To Next Page
Loading...
