Service Manual Removal and Replacement 2-21
3. Remove the 2 screws that secure the CD/DVD drive to the top case and motherboard.
NOTE: The screws that secure the CD/DVD drive are 2 different sizes. The front screw is a
M2.5×6.0mm screw. The back screw is a M2.5×4.0mm screw. Make sure these screws are installed in the
correct locations when reinstalling the CD/DVD drive.
4. Place your index finger in the top case opening, and then push out on the CD/DVD drive to release it
from the motherboard.
5. Remove the CD/DVD drive.
Figure 2-15. Removing the CD/DVD Drive
HP Pavilion ze4x00, HP nx9005 and nx9000,
Compaq Evo Notebook N1050v and N1010v, and
Compaq Presario 2100 and 1100 Models
To Next Page
Loading...
Need help?
General