2-38 Removal and Replacement Service Manual
Removing the Audio PCA
(Authorized Service Providers Only)
NOTE: The following audio PCA removal instructions apply only to HP Pavilion ze5300 and ze5200,
HP nx9010, and Compaq Presario 2500 models.
Required Equipment
1 Phillips screwdriver
Removal Procedure
1. Unplug the AC adapter, if present, and then remove the battery.
2. Remove these additional assemblies:
•
Hard disk drive (page 2-9)
• Keyboard cover (page 2-13)
• Keyboard (page 2-16)
• Switchboard PCA (page 2-19)
• Display assembly (page 2-23)
• Top case (page 2-26)
3. Disconnect the audio PCA cable from the motherboard.
4. Remove the audio PCA cable from the clip on the bottom case.
To Next Page
Loading...
Need help?
General