10-12 User-Defined Symbol Sets EN
Symbol Set Control Command
This command provides a means for making user-defined symbol
sets permanent or temporary, and for deleting them.
E
C
* c # S
# = 0 -Delete all temporary and permanent user-defined
symbol sets.
1 - Delete all temporary user-defined symbol sets.
2 - Delete current user-defined symbol set
(last symbol set ID code specified).
4 - Make current user-defined symbol set temporary.
5 - Make current user-defined symbol set permanent.
Default = n/a
Range = 0-2, 4, 5 (other values ignored)
Downloaded symbol sets default to temporary.
Internal symbol sets cannot be deleted or made temporary.
To Next Page
Loading...
Need help?
General
