EN iii
Printing History
This manual was created using HP Tag/Vectra software on an
HP Vectra Personal Computer. The body text is printed in Helvetica
fonts. The camera-ready copy was printed on an HP LaserJet IIISi
printer with Resolution Enhancement technology (REt) and was then
reproduced using standard offset printing.
First Edition – October 1992
NOTICE
This document is the current edition of the technical reference manual for PCL
5 and earlier printers. It replaces the September 1990 edition of the HP PCL 5
Printer Language Technical Reference Manual (p/n 33459-90903). If you have
ordered another PCL Technical Reference document, this manual and the PCL
5 Comparison Guide are the updated replacement documents.
To Next Page
Loading...
