EN Rectangular Area Fill Examples 14-17
This example prints the following:
Figure 14-6 Patterned Fill Example
User-defined Pattern Example
This example shows how to print a user-defined pattern which has
already been downloaded to the printer. For this example we will print
the pattern of triangles which was downloaded in the example in
Chapter 13, under “User-Defined Pattern Command.”
The following commands define a 600 PCL Unit square rectangular
area, select ID number 3, and print the user-defined pattern
associated with that ID number.
1 Position the cursor:
E
C
*p300x400Y
Moves the cursor to PCL Unit position (300,400) within the
PCL coordinate systems.
2 Specify the width and height of the rectangle:
E
C
*c600a600B
To Next Page
Loading...
