Table 6-3 Computer Setup Advanced (for advanced users) (continued)
Option Heading
System Options Configure storage controller for Intel Optane™ (Intel products only)
Enables the Intel Optane memory module.
Configure storage controller for RAID
Enables RAID. Default is enabled.
Limit PCIe Speed (workstation models only)
Lets you restrict the maximum speed of the PCI Express devices to previous generations. The
following settings are possible:
● Auto
● Gen 1 (2.5 Gbps)
● Gen 2 (5 Gbps)
● Gen 3 (8 Gbps)
Turbo-boost (Intel products only)
Allows Intel Turbo Boost Technology to improve performance when operation conditions allow.
Default is enabled.
Hyperthreading (Intel products only)
Lets you control processor capability. Default is enabled.
Virtualization Technology (VTx) (Intel only)
Controls the virtualization features of the processor. Changing this setting requires turning the
computer off and then back on. Default is disabled.
Virtualization Technology for Directed I/O (VTd) (Intel only)
Controls virtualization DMA remapping features of the chipset. Changing this setting requires
turning the computer off and then back on. Default is disabled.
SVM CPU Virtualization (AMD® products only)
Enables AMD-V and AMD-Vi virtualization features on AMD-based systems
Enhanced Hello Sign-in (systems with supporting hardware for biometric identification only)
Allows for secure logon using the Windows Hello feature.
DMA Protection
Enables DMA redirection using IOMMU for enhanced security. Default is enabled.
NOTE: Requires that VTd is enabled.
Pre-boot DMA protection
Secures memory access through DMA to allowed regions prior to operating system startup.
Full encryption of main memory (DRAM) (select products only)
Stores all data to DRAM in an encrypted format. Default is enabled.
PCI slots (vary by product)
Lets you enable or display PCI slots. Default is enabled.
80
Chapter 6 Computer Setup (F10) Utility
To Next Page
Loading...
