Table 6-3 Computer Setup Advanced (for advanced users) (continued)
Option Heading
System Options M.2 slots (vary by product)
Let you enable or display M.2 slots. Default is enabled.
Performance Control (High Performance Mode/Performance Mode/Quiet Mode)
Select Quite Mode to prioritize acoustics. Select Performance Mode for a balance between
performance and acoustics. Select High Performance Mode to prioritize performance.
Power Button Override (disable/4 sec/15 sec/30 sec)
Lets you enable and select the number of seconds you have to hold down the power button for it to
force the system to turn off. Default is 4 sec.
USB Type-C Connector System Software Interface (UCSI) (select products only)
Allows UCSI to be exposed to the operating system (ACPI table).
HP Application Driver
Provides ACPI structure to enable HP common software application framework. The driver is
provided in the latest HP support software that you can download from the web.
NOTE: Device Manager shows an alert if this setting is enabled without the HP application driver
installed.
AMD DASH
Lets you enable AMD Remote system management capability. Default is disabled.
Hardware enabled Spectre Variant 2 Mitigation
Enables Single Thread Indirect Branch Predictor (STIBP) functionality in AMD processors. Default is
disabled.
Computer Setup Advanced
81
To Next Page
Loading...
