EasyManua.ls Logo

HP Pro SFF 400 G9 - Page 97

HP Pro SFF 400 G9
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 7-1 POST numeric codes and text messages (continued)
Control panel message Description Recommended action
00B-MEBx Module did not checksum
correctly
Memory error during POST execution
of the Management Engine (ME) BIOS
Extensions option ROM.
1. Reboot the computer.
2. Unplug the power cord, reseat the
memory modules, and reboot the
computer.
3. If the memory configuration was
recently changed, unplug the power
cord, restore the original memory
configuration, and reboot the
computer.
4. If the error persists, replace the
system board.
00C-PMM Deallocation Error during
MEBx Cleanup
Memory error during POST execution
of the Management Engine (ME) BIOS
Extensions option ROM.
1. Reboot the computer.
2. Unplug the power cord, reseat the
memory modules, and reboot the
computer.
3. If the memory configuration was
recently changed, unplug the power
cord, restore the original memory
configuration, and reboot the
computer.
4. If the error persists, replace the
system board.
00D-Setup Error during MEBx Execution MEBx selection or exit resulted in a setup
failure.
1. Reboot the computer.
2. Unplug the power cord, reseat the
memory modules, and reboot the
computer.
3. If the memory configuration was
recently changed, unplug the power
cord, restore the original memory
configuration, and reboot the
computer.
4. If the error persists, replace the
system board.
00E-Inventory Error during MEBx
Execution
BIOS information passed to the MEBx
resulted in a failure.
1. Reboot the computer.
2. If the error persists, update to the
latest BIOS version.
3. If the error still persists, replace the
system board.
00F-Interface Error during MEBx
Execution
MEBx operation experienced a hardware
error during communication with the ME.
1. Reboot the computer.
2. If the error persists, update to the
latest BIOS version.
3. If the error still persists, replace the
system board.
100-Front Audio Not Connected Front audio cable has been detached or
unseated from system board.
Reconnect or replace front audio cable.
90 Chapter 7 POST error messages

Table of Contents

Related product manuals